Connect with us

ASA STARS

CARS STARS issues chassis rules bulletin; still work to be done

Super Late Model teams across the country were presented a rules bulletin by the CARS STARS Super Tour and its adjacent regional divisions on Tuesday concerning chassis regulations and other related matters.

It’s important to note that these rules came from the Approved Body Committee and that the MDM Promotional entity that operates the Sanctioning Body accepted them. This doesn’t mean that these rules are final as there has been some pushback across the industry to them, which is not falling on deaf ears.  

What comes next is that MDM Promotions will continue to engage in dialogue with competitors, something the Sanctioning Body expressed to them in an email on Wednesday, before sending something back to the ABC group for review.

The ABC would then submit another rules package which CARS STARS and Co. could then choose to accept or reject before finalizing a rules book expected to come in December.

The current ABC Committee is comprised of the following membership:

Chair (Non voting): Marty Melo
Five Star (Non voting): Chris Wiess
AR Bodies (Non voting): Vacant

Voting members:

Kip Childress (CARS Tour)
Todd Thelen: (Midwestern)
Rudy Hernandez (STARS CARS)
Tim Bryant: (Deep South)
Dan Garber (Northwest)
Tim Huddleson (West Coast)
Alex Nagy (Canada)

All of this is to say that while there is a lot to still sort out, these rules are more of a direction, than the final decision. It’s also objectively going to be an expensive off-season, but it always was going to be with a lot of change in the national Super Late Model landscape and a bold new direction spearheaded by Melo, Kevin Harvick and Tim Huddleston.

The rules bulletin is detailed in its entirety below.

OIL TANK

The lowest flat surface of any external fluid tank, including mounting brackets, must be a minimum of two inches (2”) from the bottom of the frame rail. Tank mounts cannot extend below the height. No Pan or Protecting cover can be added.

BATTERY BOX

The maximum dimension of the battery box is 10.5” x 7.5”. The battery box must have a solid bottom. The lowest flat surface of the battery box, including mounting brackets, must be a minimum of two inches (2”) from the bottom of the frame rail.

FUEL CELL LOCATION & MOUNTING

Fuel cells can be no closer than eleven inches (11″) off the back rearend axle tube, on both the left and right sides. Fuel cells must be securely mounted with at least four (4), minimum Grade 5, 3/8-inch-diameter bolts minimum, two (2) per side, unless the mounting structure is permanently welded to the chassis. Fuel cells must be mounted with four (4) 1/8” steel tabs that are welded to the chassis. If mounting the fuel cell directly to the chassis, the frame rail must be sleeved and or bunged and must use minimum Grade 5, 3/8” bolts minimum, through the chassis. Sliders, slugs, adjustable mounts, and any mechanism permitting repositioning or movement are prohibited. Fuel cells must always be a minimum of 8” from the ground to the bottom of the fuel cell. This measurement must be met at any given time. When the nose is at tech or race height. No exception.

FUEL CELL CONSTRUCTION & CAPACITY

All fuel cells must have a maximum capacity of twenty-two (22) gallons. Fuel cells must have an outer container of magnetic steel at least 22 gauge thick, with an approved rubber or Kevlar fuel bladder. No plastic. All fuel cell tops that are removable must have 1⁄4” bolts holding the top of the can on.

FUEL CELL RETAINING STRAPS

All fuel cells must have two (2) straps steel retaining straps measuring a minimum of 1 1⁄2” x 0.125” minimum thick magnetic steel or 1”x 1” square steel tubing with a minimum thickness of .065” (.000 tolerance) across the front, back, and top of the fuel cell assembly, attached securely to the fuel cell mounting frame structure. Straps must prevent lifting, shifting, or dislodging.

LEFT SIDE DOOR BARS & FRAME RAILS

The minimum left-side door bar height is twenty-three inches (23″), measured vertically from the bottom of the main frame rail to the top of the uppermost left-side door bar. All chassis, regardless of manufacture date, must comply by the June 1, 2027, deadline. Additional safety requirements may be announced following committee review.

RIGHT SIDE DOOR BARS & FRAME RAILS

No right-side weight rails or extra panning will be permitted.

RACK PLATE

The rack plate (as shown in the Chassis Diagram) may not exceed 6” width in the front and may not exceed 18.5” width in the rear. These maximum dimensions are effective January 1, 2027. By January 1, 2028, the rack plate may not exceed 6” front and 9” rear.

CHASSIS DIAGRAM COMPLIANCE

The official 2027 Chassis Diagram and Technical Guidelines shall serve as the governing technical standard for all chassis construction, configuration, and inspection. All competing vehicles must comply with the requirements, dimensions, specifications, and limitations outlined in the official 2027 chassis diagram and accompanying guidelines. As a minimum, all vehicles are required to have basic and typical roll cage and main frame configured as shown in the diagram. Any additional roll bars, box tubing or cross members must be approved by CARS Tour Officials. Modifications or alterations which detract from or compromise the integrity or effectiveness of any roll cage or main frame component will not be permitted.

All chassis are subject to inspection and approval by CARS Tour Officials. Any chassis found not to comply with the official 2027 CARS Tour Chassis Diagram, technical guidelines, or applicable chassis rules may be deemed ineligible for competition until the noncompliance has been corrected and approved by CARS Tour Officials.

Matt Weaver is the owner and founder of Short Track Scene. Weaver grew up in the sport, having raced himself before becoming a reporter in college at the University of South Alabama. He also has extensive experience covering NASCAR, IndyCar and Dirt Sprint Cars.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Facebook

Archive

Advertisement

More in ASA STARS